The Hauer pallet fork is equipped with high-quality, forged tines in various lengths to meet all requirements. For precise adjustment of the tines the fork carriage and the locking recesses are milled. The pallet fork and all other Hauer implements are available with the well-proven Hauer hooks or Euro hooks, but are also available for different loader makes and models including wheeled, skid-steer and compact loaders as well as telehandlers.

The pallet frame is optionally available with ISO-FEM II tines holder.

The heavy-duty pallet frame can be ordered in 3 different widths (1300, 1500, and 2000 mm) and can be combined with different tines from 1100 up to 2200 mm with different carrying capacity.

The Big-Bag-Lifter has one vertical standing arm with a left bended hook at the end. This curvy shape facilitates the view on the top to easily put up Big Bags, especially when using a telescopic loader. A high load capacity ensures the transport of large Big-Bags too. The coupling plates are screwed on the frame and can be therefore changed very quickly and with low effort.

• good view of the top of the hook by bent shape
• putting up and putting down of Big Bags without getting off the tractor
• screwed coupling plates for quick change

Because of higher system hydraulic pressure, a pressure relief valve for the cylinders has to be mounted. Fiiting coupling plates are available on request.

The pallet frame width is 1300 mm and can be shifted 200 mm to the left or to the right. Therewith either the tines can be brought quickly into a closer position to the pallet or box or the load can be shifted to the side.

The pallet fork with hydraulic lateral adjustement is available with 960, 1100 or 1200 mm tines.

Because of higher system hydraulic pressure, a pressure relief valve for the cylinders has to be mounted. Fiiting coupling plates are available on request.

The opening and closing angle width can be adjusted twice and the holding down device can be demounted by four locking pins. The pallet fork with hydraulic holding down device is available with 3 different tine lengths: 960, 1100 or 1200 mm.
The pallet fork is also available without the holding down device, but with the preparation for it.

Because of higher system hydraulic pressure, a pressure relief valve for the cylinders has to be mounted. Fiiting coupling plates are available on request.

The tines are adjustable and can be fixed. The pallet frame width is 1300 mm and can be rotated 160° to the left and 160° to the right.

Im combination with the universal box holder, boxes can be emptyed easily sidewards so that the box is not tilting.

Because of higher system hydraulic pressure, a pressure relief valve for the cylinders has to be mounted. Fiiting coupling plates are available on request.

For maximum safety, the pallet fork with 1100 mm tines is optional also available with folding tines. The tines can be easily and simply folded upwards via a quick release for road transport. This considerably minimizes the risk of injury in traffic.